ТМ «ЯК КАРПАТІЯ» manufactures a three-layer spliced window eurobrushes IV-68 (72x86x6000 mm), IV-78 (82x86x6000 mm) in full technological cycle, using the modern equipment of well-known European companies Weinig (Germany), Polzer (Germany), Muhlbock (Austria) and others. 2008 release. Raw materials are delivered from forestry in Western Ukraine.
The board for the fabrication of the eurobrushes undergoes the process of removing moisture in the drying chambers with MB net software, which allows to carry out the drying process up to 8-10% humidity. After that, there is a careful rejection of the wood, removal of defective areas (with knots, cracks, etc.) and preparation of the base surfaces for further processing. At the ends of the workpieces are cut gear microspikes. The selected slats are joined in length and glued to the beam using JOVAT 195.40, 195.30 glue, which corresponds to the quality of SHR (COMO Netherlands) according to load group D4 according to DIN EN204 / 205, which withstands WATT 91 standards> 7.0 N / mm2 (tested Rosenheim IFT) The moisture content of the beam after bonding is only 10-12%.
The front slats have a radial cut, and the internal tangential, with this method of manufacturing Eurobrushes, thanks to different orientation of the fibers, increases the strength up to 80% and stiffness up to 40%, which allows to make large designs of windows. Thanks to modern equipment, high precision of geometric shapes and cleanliness of surfaces are achieved during the production process. The quality of the products is strictly controlled by qualified personnel.
ТМ «ЯК КАРПАТІЯ» manufactures and delivers window eurobrushes throughout Ukraine and exports to France, Germany and other countries.
